iHeat AHSH2500 Hot Spot Electric Shower Head :
The iHeat AHSH2500 is a mini electrical tankless water heater. It is called HotSpot. It is small unit that can be installed anywhere where you have the required 110 Volts AC, at least 25 PSI of inlet water flow with temperature above 70 F degrees (21.11 Celsius Deg) and the required plumbing fittings. This shower head water heater brings 1.5 GPM of continuous hot water with only 2.5 kW of electrical power needed.
Product Description :
It is water proof, safe and reliable. Powerful enough to be used on houses, apartments, public showers, shelters, cabins, boats, RVs, and in any place where hot water is needed for a shower. It can be connected to a generator and can be used as a portable unit. It is easy to install with minimal tools and has all of the needed accessories in the box including the wire (If you need to connect this Shower Head to electrical socket or outlet you will need to install an input plug to the provided wire). This unit is a point of use water heater, for showers.
If you need more power or if you are in places where the water is less than 70F Degrees this unit will not bring the expected services and you will require a higher power heater or another water heater used as primary heater that brings the required minimal temperature to the AHSH2500 HotSpot shower head. It plugs directly into an american 110 volt three prong plug. Will barely warm the water if its cold. Will heat it if it is already Luke warm . internal breaker kicks it off before a quick shower is done. I will look for a better one soon. You get what you pay for. It was worth a try though.
Technical Details :
|Item Weight||4 pounds|
|Product Dimensions||10 x 4.2 x 5 inches|
|Item model number||AHSH2500|
|Material||Stainless Steel, Plastic|
|Power Source||AC 110 Volts|
|Amperage Capacity||23 A|
|Number Of Pieces||1|
|Flow Rate||1.5 GPM|
|Water Consumption||1.5 GPM|
|Maximum Pressure||150 PSI|
|Capacity Description||1.5 GPM|
|Extension Length||More than 6″ FT|
|Special Features||Easy to Install|
|Usage||Infour and Outdoor|
Additional Information :
- For areas with warm climates where the incoming water temperature is above 75 degrees Fahrenheit.
- Heat Exchangers are stainless Steel and allows for several years of uninterrupted use.
- Microprocessor Controlled and Safety Thermostatic Cut off.
- 5-Power Settings, LED Indicator lights shows Power.
- Patented Designed and Complies with US and Canadian Safety Standards.
- Designed for inlet water temperatures above 70F Degrees (21.11 Celsius Deg)
What do iHeat AHSH2500 Hot Spot Electric Shower Head users say about the product?
Worked great, don’t open water all the way. The slower the stream, the water gets hotter.
This is a good product. I had it professionally installed and I’m very pleased with the results. Until now, we haven’t had actual hot water at the kitchen sink without letting the hot side of the tap flow for several minutes. I’m pleased.
My wife, with her arthritic hands, now loves me more.